TFT LCD Touch Screen 240 * RGB * 320 A-Si TFT Driver IC:ST7789V
General Specifications:
Item | Specification standard | |
Display Format | 240 * RGB * 320 | pixel |
Outline Dimension | 55.04(W)* 77.20(H) * 2.5+-0.05(T) | mm |
Lcd Dimension | 51.60*71 | |
Active Area | 48.60*64.80 | mm |
Dot Size | 0.2025*0.2025 | mm |
Backlight | Normal Black | |
Interface | R.G.B Stripe | |
Viewing Direction | 12 o’clock | |
LCD Type | a-Si TFT | |
Driver IC | ST7789V | |
Pin Assignments
PIN | Pin definition definition definition | Function Declaration |
1 | LEDK | Cathode of backlight |
2 | LEDA | Anode of backlight |
3 | GND | Ground |
4 | RESET | Reset signal, keep Low for more than 10ms after power-on. |
5 | SDA | DIN/SDA: serial data input/output bi-direction pin Fix to DGND level when not in use. |
6 | SCL | serial data output bi-direction pin Let it to open in MPU interface mode |
7 | RS | Read signal, rising-edge-active. |
8 | CS | Chip select input signal Low: the chip is selected and accessible High: the chip is not selected and not accessible |
9 | TE | Serve as a TE (Tearing Effect) output signal Leave the pin open when not in use. |
10 | GND | Ground |
11 | IOVCC | Connect to an external power supply of 1.65 ~ 3.3V. |
12 | VCC | Connect to an external power supply of 2.5 ~ 3.3V. |
13 | GND | Ground |
14 | GND | Ground |
15 | GND | Ground |
16 | GND | Ground |
17 | NC | NC |
18 | NC | NC |
19 | NC | NC |
20 | NC | NC |
BIBUKE TFT LCD Module Series:
1. Our standard TFT LCD Module size:
1.44'', 1.77", 2.0", 2.4", 2.8", 3.2", 3.5",
4"(3.97"), 4.3", 5", 7", 8", 9'', 10.1".
2. Developed 4.0''(3.97'') LCD module with IPS glass.
3. Developed 2.4'' to 7.0'' TFT LCD with ZIF FPC connection.
4. Standard CTP for 3.2'', 3.5'', 4.3", 5.0", 7'', 8'', 10.1''.
5. High transmittance RTP for 4.3" and 7".
6. Can make customized CTP.
Our Services:
1. Free repair within one year after the shipment of products from
us.
2. Replacement within 30 days after the shipment of products from
us due to products' problems.
3. We can print your logo and stick your model No.on the cameras.
4. We have long cooperation with many shipping companies and our
export volume is large. The shipping companies
can offer us good discounts.
5. Professional technician supports. We have a good after-sales
service team. They can solve your problems in time.
6.All goods will be inspected and tested by our engineers and QC/QA
before packing and shipment.
7.Customers satisfactory is most important to us.If you have any
problem or questions regarding our transaction.Please contact us by
Email or online. It will be responded within 24 hours.
8.Products pictures only for your reference. please kindly refer to
the specification. we can provide the products basic on the
specification. or you can offer your own specification or drawing ,
we can customize all kinds of LCD displays for you. thanks for your
kind support always.
FAQ:
1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?
Answer: No problem. Firstly, please kindly send us your
specification/ drawing paper
If you have not the specification, you can also provide your
samples; we will recommend the suitable one
if it is standard products. Or we can customize for you based on
your own requirement.
2.This LCD is just what we want, but it is big size, do you have
any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the
outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you
request.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have
not, please advise me the outline size
of the LCD display, display information( Glass thickness,
Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction,
drive condition), we can customize for you.
5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing
paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is
one day after payment. If it is the mass production for
special ones, the leading time is about 15-30 days. suppose we can
finish earlier, we will report the information in advanced.
