1.54 Inch Small TFT LCD Screen 240*240 Dots ST7789 2.8V 15pin FPC
SPI
Detail Information
| Panel Size: | 1.54 Inch(Diagonal) |
| LCD Resolution: | 240x240 Dots |
| Viewing Angle: | All |
| Driver IC: | ST7789T3 |
| Interface: | SPI |
| FPC: | 15pin |
Basic Parameters:
| NO. | ITEM | SPECIFICATIONS |
| 1 | Product Name | 1.54 Inch TFT LCD |
| 2 | LCD Type | IPS |
| 3 | Resolution | 240x240 dots |
| 4 | Operating Temperature | -20~+70℃ |
| 5 | Storage Temperature | -30~+80℃ |
| 6 | FPC Connector | 15PIN, ZIF type |
| 7 | Driver IC(COG) | ST7789T3 |
| 8 | Interface | SPI |
| 9 | Backlight Type | 3-LED, White |
| 10 | Luminance | 250 cd/m2 |
| 11 | Outline Dimension | 31.52(H)*33.72(V)*1.92(D) mm |
| 12 | Active Area | 27.72(H)*27.72(V) mm |
FAQ:
1. I want the LCD display 8 digits and the outline size is
65x30x2.8mm………?
Answer: No problem. Firstly, please kindly send us your
specification/ drawing paper
If you have not the specification, you can also provide your samples; we will recommend the suitable
one
if it is standard products. Or we can customize for you based on
your own requirement.
2.This LCD is just what we want, but it is big size, do you have
any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the
outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have
not, please advise me the outline size
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing
paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is
one day after payment. If it is the mass production for
special ones, the leading time is about 15-30 days. suppose we can
finish earlier, we will report the information in advanced.
Products Application field:
Audio product Medical Equipment
Industrial product(watermeter, electronicmeter,Equipment )
Automobiles Sports Equipment Watches
Household appliance(air condition/wash machine/electronic cooler/
refrigerator/disinfection cabinet/ wash bowl machine/ calculator
/electronic scale etc.)
